HDT high temperature filters
The filters are designed for use in high temperature systems up to 150°C (200°C intermittent operation). Thanks to its strong mechanical resistance, this filter is ideal for initial protection of a compressed air system to capture impurities, for example as an additional filter for adsorption dryers heated by a blower.
Available with filtration classes:
PF, HF - Collection type filter, suitable for removing solid particles and residual oil up to 1 micron - 0.6 mg / m³ (PF) and 0.01 micron - 0.01 mg / m³ (HF).
QF - Pre-filter, suitable for removing solid particles up to 1 micron, including liquids, emulsions and oil particles.
Standard reference conditions
- Ambient temperature: 25°C
- Working pressure: 7 bar
- Inlet air temperature: 20°C
- Max. inlet air temperature: 150°C (200°C intermittent operation)
- Max. working pressure: 16 bar
Optional accessories:
- float condensate drain
- cartridge clogging meter
- flange (only for F 0470 - F 5170 models)
| Model | Flow rate (m3/h) | BSP | Data sheet | Model | Flow rate (m3/h) | BSP | Data sheet | |
|---|---|---|---|---|---|---|---|---|
| F 0025 | 150 | 1" | F 0700 | 4 200 | DN 125 | |||
| F 0050 | 300 | 1" | F 0950 | 5 700 | DN 150 | |||
| F 0080 | 500 | 1 ½" | F 1250 | 7 500 | DN 150 | |||
| F 0130 | 800 | 2" | F 1550 | 9 300 | DN 150 | |||
| F 0170 | 1 000 | 2" | F 1850 | 11 000 | DN 200 | |||
| F 0220 | 1 300 | 2 ½" | F 2500 | 14 200 | DN 200 | |||
| F 0330 | 2 000 | 3" | F 3300 | 19 900 | DN 250 | |||
| F 0450 | 2 700 | 3" | F 5170 | 31 000 | DN 300 | |||
| F 0470 | 2 800 | DN 100 |
